And then it gets faster...

 So, I guess this is like all projects.  You work and work and work doing small, seemingly inconsequential stuff, and then all in a couple of hours, it seems to make a huge jump ahead.  After a bunch of prep of rings by sanding and epoxy coating and fitting and installing hatches (people and inspection), we finally hung the rings on the strongback.


I haven't hung the stem yet because it needs some shaping.  Once that's done, it's just about putting in a bunch of epoxy fillets to hold everything together.  Then it's on to installing and shaping stringers.

Comments

Post a Comment

Popular posts from this blog

Read at your own risk...

Image
 So, it's been a while.  Lots of painting before this, but I'll fill in those posts as soon as I can get to them. This one is more important and could actually have some info that's useful for us 5.80 guys and gals. DISCLAIMER: This is a description of MY thought process and MY results.  Your results may vary.  Please don't copy my thoughts, designs, processes or mistakes without engaging your own brain and deciding if it will work for you.  I take no responsibility if your boat falls out of the sky into the water, onto the hard or onto someone's head.  I will disavow any knowledge of your sources or process if something bad happens.  This message will self destruct after reading. I'm working on an internal lifting harness.  They're really nice to have, and my boat will be dry stored on a trailer in a yard.  Our club requires an internal lifting harness, conceivably because people do dumb stuff with slings.   These things include having the slings slide apar
Read more

Welcome to the world, keel halves!

Image
Okay, so it wasn't like giving birth.  But it's been a long time coming.  We really didn't know if it was going to be difficult, how it was going to be difficult, and how it could all go horribly wrong.  THAT'S just like kids, right? Caution: Long post.  This is one of the few subjects about building boats that I have some prior and pretty intimate knowledge of.  Read at the risk of extreme (hopefully not terminal) boredom. We needed to build the keel halves.  If you can find a big chunk of lead, you could conceiveably machine it.  Finding that chunk is hard, so you don't hear much about machining lead.  Mostly, since lead has a pretty low melting point, you hear about casting lead.  In bullets, in all kinds of non-load bearing weights, they're usually cast lead.  Since these bulbs/half bulbs will be bolted to a steel fin that will take the load of the keel bulbs, and the keel bulbs just have to keep themselves from falling apart, we'll cast them.  Lead is t
Read more

Initial Weigh In...

Image
Well, hello there.  I've been dormant (again) for a bit, but I've finally got another quick post together. I didn't make Portugal, as you can tell by me posting right about now.  If I was in Portugal, I'd be slinging masts around, mounting stuff, loading the boat, and going for trial sails to get ready to depart on 31 October.  As my boat's not done and shipping containers into or out of the US right now is just plain not possible (LA port is full, 80 freighters offshore waiting to be offloaded, no containers to be had, shipping handlers/organizers have no idea of what problem to solve, how to solve it, or when it can be solved). As such, I'm just getting to weighing my constructed hull.  This is without any equipment; only required wood is included.  I turned up at (drum roll please...) That's kilograms, friends and neighbors.  The basically bare hull weighs about 1083 lbs.  With all of the equipment (batteries, mast, sails, paint, fairing, keel, life raft,
Read more